Versa® Uni Tape 60 adhesive tape

Quantity	Unit price	Base price
To 2	€151.40	€15.14 / 1 RL
To 4	€144.20	€14.42 / 1 RL
From 5	€137.00	€13.70 / 1 RL

Prices incl. VAT

20 Reviews

Stretchable with extreme adhesion
High flexibility & aging resistance
Air & windtight bonding & sealing

Dimensions:
25 m X 60 mm

Rolls per Box
10 Rolls

Execution

Box

Roll

Total:

Box

Product number: SW10045.1

Available variants

Preview	Product number	Execution	Content	Unit price	Buy

Extreme adhesive strength
Stretchable
For inside and outside

Product advantages

For inside and outside

Versatile application

Tear-resistant liner

Time saving

High adhesive strength in cold & heat

High quality

✓

EXTREME ADHESIVE STRENGTH AND FLEXIBILITY

Durable airtight and windproof sealing of vapor retarders, roof and façade membranes for interior and exterior use. Ideal for overlaps, connections and repairs.

✓

EASY INSTALLATION

The unique tear-resistant cover liner enables effortless, fast application, especially for long overlaps and overhead work.

✓

HIGH AGEING RESISTANCE

The high-quality acrylic adhesive ensures that the high-performance tape is securely anchored over a long service life. Moisture-resistant and durable.

✓

FREE FROM RESIDENTIAL TOXINS

ALMO Versa is free of solvents, chlorine and formaldehyde.

Technical data

Application	Adheres to wood materials, plasterboard materials, vapor retarders, metal, roof and façade membranes
Features	Tear-resistant liner
Carrier system	Grid-reinforced LDPE film
Adhesive	Modified dispersion acrylate
Coverage	Tear-resistant plastic line
Roll length	25m
Width	60mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	-5 °C to +40 °C

Carrier system:	Grid-reinforced LDPE film
Characteristics:	Tear resistant liner
Adhesive:	Modified dispersion acrylate
Cover:	Tear resistant plastic liner
Roll length:	25m
Width:	60mm
Temperature resistance:	-40 °C to +100 °C
Processing temperature:	-5 °C to +40 °C

Downloads

Data sheet_Versa Uni Tape 60

Fiche technique_Versa Uni Tape 60

Zertifikat Emicode ALMO Versa

Use for this

Use with

ProLine 220G Roof membrane

Grid reinforced
Open to diffusion
Integrated self-adhesive seam

(4)

Content: 75 m² (€2.00 / 1 m²)

From €57.89

Buy now

Topseller

ProLine 150 Roof and facade membrane

Driving rain proof
Open to diffusion
Integrated self-adhesive seam

(20)

Content: 75 m² (€1.56 / 1 m²)

From €43.50

Buy now

Topseller

TOPCOAT Thermo 220 Roof membrane

Permanently UV-resistant
Heat resistant
Nail-tight

(8)

Content: 75 m² (€2.79 / 1 m²)

From €48.50

Buy now

TOPCOAT TPU 240 Roof membrane

Nail-tight
Highly diffusible
TPU coating

Product advantages

Nail-tight

Penetration protection

UV-resistant

Long-term protection

Temperature resistant

Withstands extreme conditions

✓

UV-RESISTANT & DURABLE

With a UV resistance of up to 3 months and a robust polyurethane (TPU) coating, our underlayment offers long-lasting protection and durability.

✓

NAIL-TIGHT & RESISTANT TO DRIVING RAIN

The TOPCOAT TPU 240 underlay offers high nail tightness and is resistant to driving rain to ensure maximum protection in all weather conditions.

✓

HIGHLY DIFFUSIBLE

The sd value of 0.15 m guarantees effective moisture regulation and prevents condensation, thereby preventing mold growth.

✓

TEMPERATURE RESISTANCE

Withstands extreme temperatures from -40°C to +100°C while remaining flexible and functional.

✓

TIME SAVING

The integrated self-adhesive seam saves time during installation and ensures quick and secure installation, even with overlaps and connections.

Technical Data

Application	Underlayment
Features	Self-adhesive seam, nail-tight
Carrier system	Polyester fleece
Functional layer	Polyurethane (TPU) coating
Grammage	240 g/m²
Roll dimensions	40m x 1,5m
Diffusion-equivalent air layer thickness (sd value)	0,15m
Maximum tensile force longitudinal / transverse in N / 50mm	350/310
Roof pitch	10°
m² per roll	60
Suitability as temporary covering	12 Weeks
UV resistance	3 months
Temperature resistance	-40 °C to +100 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water passage	W1 (according to DIN 1928)

TOPCOAT TPU roofing membrane installation instructions

Step 1: Align and prepare the roof membrane

The ALMO TOPCOAT TPU 240 sarking and underlay membrane should be laid starting at the lower part of the roof pitch and parallel to the eaves. The printed side is the upper side and faces the installer during installation. The membrane is rolled out directly onto the rafters or onto the fully sheathed roof. The underlay should protrude slightly after positioning.

Step 2: Attachment in the eaves area

In the eaves area, the roofing membrane must be fastened under the counter battens on the eaves sheet or above the eaves batten on the gutter lashing. At the same time, water pockets and counterfalls should be avoided. Fasten the underlays to the rafters with nails or staples.

Step 3: Nail sealing tape and counter battens

To keep the rafters watertight, we recommend using a strip of our Nail sealing tape 60 under the counter battens. After spreading the membrane, counter battens and battens should be attached. The counter battens create a gap between the membrane and the battens. Ensure that all points where nails or staples pass through the membrane are sealed with nail sealing tape and are located under the counter battens.

Step 4: Overlapping and bonding underlayments

Another strip of membrane should be applied with a 10-15 cm overlap. To make the installation of the roofing membrane efficient, avoid draughts and keep the overlaps watertight, use the adhesive strips integrated with the membrane, which are glued together.

Step 5: Ridge sealing

For non-ventilated roof constructions, the membrane goes over the ridge to seal it against snow and rain. For ventilated roof constructions, the roof membrane should be approx. 5 cm from the highest ridge point. This ventilation opening should also be secured with a strip of roofing membrane fixed over a counter batten so that the membrane overlaps the roof surface by approx. 20 cm.

Step 6: Sealing for eaves

In the case of roof projections such as chimneys, the sheets should be cut, pulled out and fixed with the ALMO Versa Uni Tape be sealed. Separate strips of membrane are glued to the surface and at the corners. An inclined foil gutter can be installed above penetrating building components. To form a temporary covering, connections to rising building components must also be bonded and secured to prevent them from running behind.

Step 7: Seal overlaps to make them windproof

The resulting overlaps must be bonded laterally and transversely if wind-tightness is required. For a replacement overlap, the membrane strip of a foil gutter is extended to below the next ridge-side height overlap and taped all the way around. The open joints at the corners are taped to make them rainproof. Roof windows are integrated into the opening and fixed in place. If counter battens or the resulting frame are further away from the window, separate strips of membrane can be attached.

(2)

Content: 60 m² (€2.91 / 1 m²)

From €174.50

Buy now

Topseller

Vapour barrier Vapora Vario SD

Execution: 1.5m x 50m

Variable humidity regulation
With laying and bonding lines
Tearproof and dimensionally stable

Product advantages

Variable moisture regulation

Sd-value 0,4m - 3m

Stretchable and flexible

Adaptable & robust

Laying lines

Easy alignment & time saving

✓

HIGH FUNCTIONALITY AND SAFETY

The ALMO vapor barrier is tear-resistant, dimensionally stable and meets the strict requirements of fire class B as well as the ZVDH and EnEV standards, making it ideal for new builds, conversions and renovations. Provides the best protection against structural damage and mold.

✓

OPTIMUM MOISTURE REGULATION

Thanks to the variable sd value of 0.4m to 3.2m, our vapor barrier film adapts to seasonal conditions to effectively regulate moisture and prevent the formation of condensation.

✓

BREATHABLE

The high-quality vapor barrier is breathable and helps to create an airtight building envelope that improves the indoor climate and increases energy efficiency.

✓

UNIVERSALLY APPLICABLE & SUSTAINABLE

Our ALMO vapor retarder combines moisture-regulating properties with outstanding re-drying potential to promote sustainable, robust and healthy construction. Particularly suitable for internal and external insulation between rafters and for insulation on top of rafters with mineral insulation.

✓