ProLine 130 Roof and facade membrane

€75.60

Content: 37.5 m² (€2.02 / 1 m²)

Prices incl. VAT

75 Reviews

For reliable protection of roof structures and closed facades

Driving rain resistant
Breathable
With self-adhesive strips

Execution

1.5m x 25m

1.5m x 50m

Total:

roll

Product number: SW10000.2

Driving rain proof
Open to diffusion
Integrated self-adhesive seam

Product advantages

UV-resistant

Long-term protection

Open to diffusion

Prevents mold growth

Driving rain proof

Water-repellent, protection from rain

✓

EASY TO INSTALL

With a surface weight of 130g/m² and double self-adhesive strips (SK), ProLine 130 is safe and quick to install.

✓

EXTREMELY OPEN TO DIFFUSION

The water vapor-permeable special membrane allows the insulation to dry out optimally and prevents mold growth.

✓

VARIABLY APPLICABLE

The ALMO underlay can also be used as a façade membrane for closed facades.

✓

APPLICABLE FROM ROOF PITCH > 15°

The ProLine 130 is versatile and can be used for roof pitches from 15°.

✓

VERY TEAR RESISTANT

The three-layer construction with 2 nonwovens on the outside and a special membrane makes the ProLine 130 very tear-resistant.

✓

A-CLASSIFICATION

The ALMO ProLine 130 complies with the ZVDH classification UDB-A / USB-A.

Technical Data

Application	Underlayment
Features	Self-adhesive seam, open to diffusion
Carrier system	Polypropylen Fleece
Functional layer	Microporous functional film
Grammage	130 g/m²
Roll dimensions	25m x 1,5m
Diffusion-equivalent air layer thickness (sd value)	0,02 m
Roof pitch	15°
Maximum tensile force longitudinal / transverse in N / 50mm	305/180
m² per roll	37,5
UV resistance	1 month
Temperature resistance	-40 °C to +80 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water penetration	W1 (according to DIN 1928)

Installation instructions for ProLine roof & facade membranes

Step 1: Align and prepare the roof membrane

The ALMO ProLine sarking and underlay membrane should be laid starting at the lower part of the roof pitch and parallel to the eaves. The printed side is the upper side and faces the installer during installation. The membrane is rolled out directly onto the rafters or onto the fully sheathed roof. The underlay should protrude slightly after positioning.

Step 2: Fastening in the eaves area

In the eaves area, the roofing membrane must be fastened under the counter battens on the eaves sheet or above the eaves batten on the gutter lashing. At the same time, water pockets and counterfalls should be avoided. Fasten the underlays to the rafters with nails or staples.

Step 3: Nail sealing tape and counter battens

To keep the rafters watertight, we recommend using a strip of our Nail sealing tape 60 under the counter battens. After spreading the membrane, counter battens and battens should be attached. The counter battens create a gap between the membrane and the battens. Make sure that all points where nails or staples pass through the membrane are sealed with nail sealing tape and are located under the counter battens.

Step 4: Overlap and bond the roofing membranes

Another strip of membrane should be applied with a 10-15 cm overlap. To make the installation of the roofing membrane efficient, avoid draughts and keep the overlaps watertight, use the adhesive strips integrated with the membrane, which are glued together.

Step 5: Ridge sealing

For non-ventilated roof constructions, the membrane goes over the ridge to seal it against snow and rain. For ventilated roof constructions, the roof membrane should be approx. 5 cm from the highest ridge point. This ventilation opening should also be secured with a strip of roofing membrane fixed over a counter batten so that the membrane overlaps the roof surface by approx. 20 cm.

Step 6: Sealing for eaves

In the case of roof projections such as chimneys, the sheets should be cut, pulled out and fixed with the ALMO Versa Uni Tape be sealed. Separate strips of membrane are bonded to the surface and at the corners. An inclined foil gutter can be installed above penetrating building components. To form a temporary covering, connections to rising building components must be additionally bonded and secured to prevent them from running behind.

Step 7: Seal overlaps windproof

The resulting overlaps must be bonded laterally and transversely if wind-tightness is required. For a replacement overlap, the membrane strip of a foil gutter is extended to below the next ridge-side height overlap and taped all the way around. The open joints at the corners are taped to make them rainproof. Roof windows are integrated into the opening and fixed in place. If counter battens or the resulting frame are further away from the window, separate strips of membrane can be attached.

Step 1: Aligning the facade membrane

The smooth side of the Volcano® UV facade membrane should face outwards and the ProLine with the lettering should face the installer. It should be attached directly to the insulation using a stapler above the adhesive seam.

Step 2: Overlapping the facade membranes

The second facade sheet should be installed over the first facade sheet, with an overlap of around 10 cm. The self-adhesive strips of the two façade membranes should then be detached and glued closely together to ensure a tight facade seal.

Step 3: Sealing with Volcano® UV adhesive tape

The facade membranes should be overlapped using the UV-stabilized and diffusion-open Volcano® UV Facade adhesive tape for an optimal, wind-tight seal.

Step 4: Installing the counter battens

After the facade sheets have been bonded, the counter battens should be mounted directly onto the supporting structure in the direction of the supporting structure.

Step 5: Fastening the timber cladding

The timber cladding is then mounted directly onto the counter battens. It is important to fasten the timber cladding evenly and securely in order to create a stable base for the facade cladding.

Carrier system:	Polypropylen-Vlies
Application:	Underlayment / sarking membrane
Characteristics:	Self-adhesive seam, Diffusion open
Functional layer:	Microporous functional film
Weight per unit area:	130 g/m²
Diffusion-equivalent air layer thickness (sd value):	0,02m
Maximum tensile force longitudinal / transverse in N / 50mm:	305/180
Roll length:	25m
Width:	1,5m
m² per roll:	37,5
UV-resistance:	1 month
Temperature resistance:	-40 °C to +80 °C
Fire behavior:	Class E (according to EN 13501-1)
Widerstand gegen Wasserdurchgang:	W1 (nach DIN 1928)

Downloads

Data sheet_ProLine 130

ALMO Verlegeanleitung Fassadenbahn

Use for this

Use with

ALMO Covinga® 30/30 corner adhesive tape

Pre-folded 30/30
Fast and precise in corners
Air & windtight bonding

Product advantages

Precisely pre-folded 30/30

Simple and safe in corners

1 separating strip already removed

Quick and effortless bonding

High quality adhesive

Secure bonding

✓

PERFECTLY PRE-FOLDED FOR PRECISE CORNERS

The ALMO Covinga 30/30 corner adhesive tape is specially pre-folded so that it can be applied precisely in corners and edges. This creates a precise and permanently airtight bond on window and door frames and other building elements.

✓

EASY & FAST APPLICATION

Thanks to the already removed release strip on one side, the adhesive tape can be applied particularly quickly and easily. The second adhesive surface thus remains protected until it is needed.

✓

EXTREMELY STRONG ADHESION

With its high-quality dispersion acrylate adhesive, the adhesive tape adheres securely to various substrates such as wood, plasterboard, metal, plastics, vapor barriers and façade membranes - for long-term tight joints.

✓

PERMANENTLY AIRTIGHT & WINDPROOF BONDING

The tape provides a secure seal against draughts and moisture, contributing to the energy efficiency and durability of construction projects.

✓

VERSATILE APPLICATION POSSIBILITIES

Ideal for airtight and windproof bonding of vapor barriers, facade membranes and wood-based materials both indoors and outdoors.

✓

PROVEN QUALITY

Meets the highest requirements and is certified to DIN 4108-11 for safe, energy-efficient construction.

Technical data

Application	Interior & exterior, window & door frames, wood, wood-based panels, plasterboard, plastic, metal, vapor retarders & facade membranes
Characteristics	Tear-resistant liner, pre-folded
Carrier system	Polypropylene fleece with special coating
Adhesive	Modified dispersion acrylate
Coverage	Tear-resistant foil liner
Roll length	25m
Width	60mm, pre-folded at 30/30
Temperature resistance	-40 °C to +90 °C
Processing temperature	-5 °C to +40 °C
Suitable for airtight sealing according to	D: EnEV, DIN 4108-7 CH: SIA 180 AT: ÖNORM B 8110-2

(5)

Content: 2 RL (€15.77 / 1 RL)

From €29.40

Buy now

ALMO Cutter Knife

Ergonomic rubber grip
High-quality blade
Sturdy aluminum casing

(3)

€6.00

Knife

ALMO TwinTape double-sided adhesive tape

Airtight installation without stapling
Double-sided strong adhesive
Tear-resistant liner

Product advantages

Gluing instead of stapling

Airtight installation without staple cracks

Tear-resistant liner

Time saving

Double-sided extreme adhesive strength

Quick & easy installation

✓

THE PERFECT ALTERNATIVE TO STAPLING

Thanks to its double-sided adhesive surface, ALMO TwinTape provides a strong, airtight seal that replaces conventional stapling and ensures even, clean installation without damaging the vapor barriers or connections.

✓

HIGH ADHESIVE STRENGTH FOR RELIABLE SEALING

Thanks to the high-performance adhesive, the double-sided adhesive tape guarantees permanent and secure fixing of vapor retarders and connections.

✓

EASY HANDLING THANKS TO TIGHT LINER

The tear-resistant plastic liner enables uncomplicated and precise processing of the tape, even with difficult joints.

✓

EXTREMELY RESISTANT TO AGEING

The high-performance adhesive does not dry out and remains stable for a long time without becoming brittle.

✓

TEMPERATURE-RESISTANT AND DURABLE

The double-sided adhesive tape is designed for extreme conditions - it remains fully functional even at temperatures from -40°C to +100°C and retains its adhesive strength permanently.

Technical data

Adhesive	Modified dispersion acrylate
Carrier system	Grid-reinforced LDPE foil
Coverage	Tear-resistant plastic liner
Roll length	50m
Width	20mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	-5 °C to +40 °C

(7)

Content: 2 RL (€15.77 / 1 RL)

From €15.85

Buy now

Nail-Sealing Tape 60

Strongly adhesive on one side
Pre-assembly on counter slats
Driving rain proof

Product advantages

Nail-tight

Watertight seal

Temperature resistant

Withstands extreme conditions

High adhesive strength

Firm hold

✓

STRONGLY ADHESIVE ON ONE SIDE

With 35 grams of high-quality adhesive per square meter, the ALMO nail sealing and partition wall tape adheres extremely well and reliably to wood and metal. Ideal for rain protection between counter battens and underlayment.

✓

EASY INSTALLATION

The sealing tape can be installed effortlessly with the pre-surface adhesive application.

✓

WEATHERPROOF

The PE foam sealing tape ensures perfect weather resistance. It defies strong sunlight and reliably keeps water out.

✓

VERSATILE IN USE

Perfect as a partition wall tape in interior fittings, the ALMO tape offers a flexible solution for various applications.

✓

MADE IN GERMANY

The ALMO nail sealing and partition wall tape is manufactured in Germany to the highest quality standards and therefore also has a low CO2 footprint.

Technical data

Carrier system	Polyethylene foam, 3mm
Adhesive	Synthetic rubber
Roll length	30m
Width	60mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	+5 °C to +40 °C
Fire classification	Class E (according to EN 13501-1)

(19)

Content: 2 RL (€15.35 / 1 RL)

From €16.45

Buy now

Nail-sealing Tape DSA 60

Double-sided adhesive
Tear-resistant liner
Driving rain proof

Product advantages

Nail-tight

Watertight seal

Temperature resistant

Withstands extreme conditions

High adhesive strength

Firm hold

✓

DOUBLE-SIDED STRONG ADHESIVE

✓

EASY INSTALLATION

The sealing tape can be installed effortlessly with the pre-surface adhesive application.

✓

WEATHERPROOF

The PE foam sealing tape ensures perfect weather resistance. It defies strong sunlight and reliably keeps water out.

✓

VERSATILE IN USE

Perfect as a partition wall tape in interior fittings, the ALMO tape offers a flexible solution for various applications.

✓

MADE IN GERMANY

The ALMO nail sealing and partition wall tape is manufactured in Germany to the highest quality standards and therefore also has a low CO2 footprint.

Technical data

Carrier system	Polyethylene foam, 3mm
Adhesive	Synthetic rubber
Coverage	Tear-resistant plastic liner
Roll length	30m
Width	60mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	+5 °C to +40 °C
Fire classification	Class E (according to EN 13501-1)

(7)

Content: 2 RL (€21.42 / 1 RL)

From €18.50

Buy now

Topseller

Versa® Black 60 adhesive tape

Extreme adhesive strength
Extremely UV-stable
Flexible and stretchable

Product advantages

UV-resistant

Long-term protection

Tear-resistant liner

Time saving

High adhesive strength in cold & heat

High quality

✓

EXTREMELY UV-STABLE AND WATERPROOF

Our ALMO adhesive tape is specially UV-stabilized to provide long-lasting protection and remains completely waterproof even under extreme weather conditions.

✓

STRETCHABLE AND STRONG ADHESION

Developed to adhere strongly even at temperatures from -40°C to +100°C. The high elongation and flexibility enable a windtight seal outdoors, ideal for all climatic conditions.

✓

QUICK AND EASY INSTALLATION

Thanks to the unique, tear-resistant cover liner, the tape is easy to work with, perfect for demanding overlaps and overhead work.

✓

HIGH PERFORMANCE WITH A LONG SERVICE LIFE

The high-quality acrylic adhesive guarantees permanent anchoring and resistance to ageing, ensuring reliable use for years to come. The adhesive tape is also moisture-resistant.

✓

MADE IN GERMANY – QUALITY GUARANTEE

Manufactured to the strictest German quality standards, our ALMO Versa Black UV adhesive tape comes with a 10-year guarantee that promises the highest quality and reliability.

Technical Data

Application	Adheres to wood materials, plasterboard materials, metal, roof and façade membranes
Features	Tear-resistant liner
Carrier system	Grid-reinforced LDPE film
Adhesive	Modified dispersion acrylate
Coverage	Tear-resistant plastic liner
Roll length	40m
Width	60mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	-5 °C to +40 °C

(10)

Content: 2 RL (€20.59 / 1 RL)

€34.70

Buy now

Topseller

Versa® Uni Tape 60 adhesive tape

Extreme adhesive strength
Stretchable
For inside and outside

Product advantages

For inside and outside

Versatile application

Tear-resistant liner

Time saving

High adhesive strength in cold & heat

High quality

✓

EXTREME ADHESIVE STRENGTH AND FLEXIBILITY

Durable airtight and windproof sealing of vapor retarders, roof and façade membranes for interior and exterior use. Ideal for overlaps, connections and repairs.

✓

EASY INSTALLATION

The unique tear-resistant cover liner enables effortless, fast application, especially for long overlaps and overhead work.

✓

HIGH AGEING RESISTANCE

The high-quality acrylic adhesive ensures that the high-performance tape is securely anchored over a long service life. Moisture-resistant and durable.

✓

FREE FROM RESIDENTIAL TOXINS

ALMO Versa is free of solvents, chlorine and formaldehyde.

Technical data

Application	Adheres to wood materials, plasterboard materials, vapor retarders, metal, roof and façade membranes
Features	Tear-resistant liner
Carrier system	Grid-reinforced LDPE film
Adhesive	Modified dispersion acrylate
Coverage	Tear-resistant plastic line
Roll length	40m
Width	60mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	-5 °C to +40 °C

(24)

Content: 2 RL (€15.77 / 1 RL)

From €25.30

Buy now

Use with

ALMO Covinga® 30/30 corner adhesive tape

Pre-folded 30/30
Fast and precise in corners
Air & windtight bonding

Product advantages

Precisely pre-folded 30/30

Simple and safe in corners

1 separating strip already removed

Quick and effortless bonding

High quality adhesive

Secure bonding

✓

PERFECTLY PRE-FOLDED FOR PRECISE CORNERS

✓

EASY & FAST APPLICATION

Thanks to the already removed release strip on one side, the adhesive tape can be applied particularly quickly and easily. The second adhesive surface thus remains protected until it is needed.

✓

EXTREMELY STRONG ADHESION

✓

PERMANENTLY AIRTIGHT & WINDPROOF BONDING

The tape provides a secure seal against draughts and moisture, contributing to the energy efficiency and durability of construction projects.

✓

VERSATILE APPLICATION POSSIBILITIES

Ideal for airtight and windproof bonding of vapor barriers, facade membranes and wood-based materials both indoors and outdoors.

✓

PROVEN QUALITY

Meets the highest requirements and is certified to DIN 4108-11 for safe, energy-efficient construction.

Technical data

Application	Interior & exterior, window & door frames, wood, wood-based panels, plasterboard, plastic, metal, vapor retarders & facade membranes
Characteristics	Tear-resistant liner, pre-folded
Carrier system	Polypropylene fleece with special coating
Adhesive	Modified dispersion acrylate
Coverage	Tear-resistant foil liner
Roll length	25m
Width	60mm, pre-folded at 30/30
Temperature resistance	-40 °C to +90 °C
Processing temperature	-5 °C to +40 °C
Suitable for airtight sealing according to	D: EnEV, DIN 4108-7 CH: SIA 180 AT: ÖNORM B 8110-2

(5)

Content: 2 RL (€15.77 / 1 RL)

From €29.40

Buy now

ALMO Cutter Knife

Ergonomic rubber grip
High-quality blade
Sturdy aluminum casing

(3)

€6.00

Knife

ALMO TwinTape double-sided adhesive tape

Airtight installation without stapling
Double-sided strong adhesive
Tear-resistant liner

Product advantages

Gluing instead of stapling

Airtight installation without staple cracks

Tear-resistant liner

Time saving

Double-sided extreme adhesive strength

Quick & easy installation

✓

THE PERFECT ALTERNATIVE TO STAPLING

✓

HIGH ADHESIVE STRENGTH FOR RELIABLE SEALING

Thanks to the high-performance adhesive, the double-sided adhesive tape guarantees permanent and secure fixing of vapor retarders and connections.

✓

EASY HANDLING THANKS TO TIGHT LINER

The tear-resistant plastic liner enables uncomplicated and precise processing of the tape, even with difficult joints.

✓

EXTREMELY RESISTANT TO AGEING

The high-performance adhesive does not dry out and remains stable for a long time without becoming brittle.

✓

TEMPERATURE-RESISTANT AND DURABLE

The double-sided adhesive tape is designed for extreme conditions - it remains fully functional even at temperatures from -40°C to +100°C and retains its adhesive strength permanently.

Technical data

Adhesive	Modified dispersion acrylate
Carrier system	Grid-reinforced LDPE foil
Coverage	Tear-resistant plastic liner
Roll length	50m
Width	20mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	-5 °C to +40 °C

(7)

Content: 2 RL (€15.77 / 1 RL)

From €15.85

Buy now

Nail-Sealing Tape 60

Strongly adhesive on one side
Pre-assembly on counter slats
Driving rain proof

Product advantages

Nail-tight

Watertight seal

Temperature resistant

Withstands extreme conditions

High adhesive strength

Firm hold

✓

STRONGLY ADHESIVE ON ONE SIDE

✓

EASY INSTALLATION

The sealing tape can be installed effortlessly with the pre-surface adhesive application.

✓

WEATHERPROOF

The PE foam sealing tape ensures perfect weather resistance. It defies strong sunlight and reliably keeps water out.

✓

VERSATILE IN USE

Perfect as a partition wall tape in interior fittings, the ALMO tape offers a flexible solution for various applications.

✓

MADE IN GERMANY

The ALMO nail sealing and partition wall tape is manufactured in Germany to the highest quality standards and therefore also has a low CO2 footprint.

Technical data

Carrier system	Polyethylene foam, 3mm
Adhesive	Synthetic rubber
Roll length	30m
Width	60mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	+5 °C to +40 °C
Fire classification	Class E (according to EN 13501-1)

(19)

Content: 2 RL (€15.35 / 1 RL)

From €16.45

Buy now

Nail-sealing Tape DSA 60

Double-sided adhesive
Tear-resistant liner
Driving rain proof

Product advantages

Nail-tight

Watertight seal

Temperature resistant

Withstands extreme conditions

High adhesive strength

Firm hold

✓

DOUBLE-SIDED STRONG ADHESIVE

✓

EASY INSTALLATION

The sealing tape can be installed effortlessly with the pre-surface adhesive application.

✓

WEATHERPROOF

The PE foam sealing tape ensures perfect weather resistance. It defies strong sunlight and reliably keeps water out.

✓

VERSATILE IN USE

Perfect as a partition wall tape in interior fittings, the ALMO tape offers a flexible solution for various applications.

✓

MADE IN GERMANY

The ALMO nail sealing and partition wall tape is manufactured in Germany to the highest quality standards and therefore also has a low CO2 footprint.

Technical data

Carrier system	Polyethylene foam, 3mm
Adhesive	Synthetic rubber
Coverage	Tear-resistant plastic liner
Roll length	30m
Width	60mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	+5 °C to +40 °C
Fire classification	Class E (according to EN 13501-1)

(7)

Content: 2 RL (€21.42 / 1 RL)

From €18.50

Buy now

Topseller

Versa® Black 60 adhesive tape

Extreme adhesive strength
Extremely UV-stable
Flexible and stretchable

Product advantages

UV-resistant

Long-term protection

Tear-resistant liner

Time saving

High adhesive strength in cold & heat

High quality

✓

EXTREMELY UV-STABLE AND WATERPROOF

Our ALMO adhesive tape is specially UV-stabilized to provide long-lasting protection and remains completely waterproof even under extreme weather conditions.

✓

STRETCHABLE AND STRONG ADHESION

Developed to adhere strongly even at temperatures from -40°C to +100°C. The high elongation and flexibility enable a windtight seal outdoors, ideal for all climatic conditions.

✓

QUICK AND EASY INSTALLATION

Thanks to the unique, tear-resistant cover liner, the tape is easy to work with, perfect for demanding overlaps and overhead work.

✓

HIGH PERFORMANCE WITH A LONG SERVICE LIFE

The high-quality acrylic adhesive guarantees permanent anchoring and resistance to ageing, ensuring reliable use for years to come. The adhesive tape is also moisture-resistant.

✓

MADE IN GERMANY – QUALITY GUARANTEE

Manufactured to the strictest German quality standards, our ALMO Versa Black UV adhesive tape comes with a 10-year guarantee that promises the highest quality and reliability.

Technical Data

Application	Adheres to wood materials, plasterboard materials, metal, roof and façade membranes
Features	Tear-resistant liner
Carrier system	Grid-reinforced LDPE film
Adhesive	Modified dispersion acrylate
Coverage	Tear-resistant plastic liner
Roll length	40m
Width	60mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	-5 °C to +40 °C

(10)

Content: 2 RL (€20.59 / 1 RL)

€34.70

Buy now

Topseller

Versa® Uni Tape 60 adhesive tape

Extreme adhesive strength
Stretchable
For inside and outside

Product advantages

For inside and outside

Versatile application

Tear-resistant liner

Time saving

High adhesive strength in cold & heat

High quality

✓

EXTREME ADHESIVE STRENGTH AND FLEXIBILITY

Durable airtight and windproof sealing of vapor retarders, roof and façade membranes for interior and exterior use. Ideal for overlaps, connections and repairs.

✓

EASY INSTALLATION

The unique tear-resistant cover liner enables effortless, fast application, especially for long overlaps and overhead work.

✓

HIGH AGEING RESISTANCE

The high-quality acrylic adhesive ensures that the high-performance tape is securely anchored over a long service life. Moisture-resistant and durable.

✓

FREE FROM RESIDENTIAL TOXINS

ALMO Versa is free of solvents, chlorine and formaldehyde.

Technical data

Application	Adheres to wood materials, plasterboard materials, vapor retarders, metal, roof and façade membranes
Features	Tear-resistant liner
Carrier system	Grid-reinforced LDPE film
Adhesive	Modified dispersion acrylate
Coverage	Tear-resistant plastic line
Roll length	40m
Width	60mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	-5 °C to +40 °C

(24)

Content: 2 RL (€15.77 / 1 RL)

From €25.30

Buy now